Product Information
- Name:Eight Channel Mic/Line Mixer with Stereo Outputs
- Model:MX821S
Overview
The ART MX821S is a versatile rack mount mixer combining eight independent input channels into a stereo line-level output. Each input channel accepts a balanced XLR microphone input or unbalanced 1/4-inch TS line-level signal and provides independent level and pan controls.
+48 Volt phantom power may be independently selected on each microphone input. A master level control adjusts the signal output to the low-impedance balanced 1/4-inch TRS jacks.
Prefade output (not affected by the master level control) and Aux Bus input RCA jacks allow patching of multiple units when more channels are needed
.
The ART MX821S may be used on stage, in the studio, or for permanent install applications including conference rooms, corporate boardrooms, churches, restaurants, small clubs, health clubs and more. A built-in power supply and single high 19-inch rack mount format allows for easy installation and reliable long-term operation.
Key Features
- Eight input channels with individual level and pan controls
- Pan controls place each input mono signal anywhere in the output stereo image
- Balanced microphone XLR or unbalanced 1/4-inch TS inputs on each channel
- Full +48V low noise phantom power switchable for each microphone input
- Balanced left and right 1/4-inch TRS main output jacks with master level control
- Prefade Output jacks and Aux Bus Input jacks allow units to be chained to provide extra inputs
- Each line input jack may be individually converted to a direct line output by means of internal jumpers
- Rugged 1U rack-mount steel chassis with built-in power supply
- Perfect for stage, studio and permanent installations
Specifications
| Input Connections | XLR female balanced (Mic, channels 1-8) 1/4-inch TS unbalanced (Line, channels 1-8) RCA unbalanced (Aux Bus In, Left and Right) |
| Output Connections | 1/4-inch TRS balanced (Main Outputs, Left and Right) RCA unbalanced (Prefade Out, Left and Right) |
| Input Impedance | 2k Ω (Mic), 20k Ω (Line), 51k Ω (Aux Bus In) |
| Output Impedance | 200 Ω (Main Outputs, balanced), 100 Ω (Prefade Out) |
| Frequency Response | 20 Hz – 20 kHz (+0, -1 dB) (CH 1-8 in, M |
| Total Harmonic Distortion | <0.01% @ 1 kHz, typical |
| Phase Response | All connections are phase coherent |
| Signal to Noise Ratio | >99dB typical (Ref 0dBu) |
| CMRR | >43 dB typical |
| Maximum Input Level | -4 dBu (Mic), +22 dBu (Line) |
| Maximum Output Level | +24 dBu (balanced), +18 dBu (unbalanced) |
| Maximum Gain | 54 dB (Mic), 29 dB (Line) |
| Phantom Power | Switch Selectable, +48V DC (regulated and filtered), 7 mA current limiting per leg |
| Power Requirements | USA: 95-125 VAC, 50-60 Hz, <15W |
| Dimensions | 1.75″ x 19″ x 6″ (4.5cm x 48.3cm x 15.2cm) |
| Weight | 6.3 lbs (2.9 kg) |
